RFID 2 + cardputer or stickC-plus2

geex3

Hi!
I have RFID 2 module and try to use it with cardputer or stickC-plus2 with Bruce on the board.
I am unable to read any NFC cards written by FlipperZero or NFC Tools.

When I try to read written cards I see

Device type: Mifare 1KB
UID: XX...
ATQA: 00 04
SAK: 08
[!]: Failed authenticating

Is my RFID 2 module broken?

I don't have an account on Discord to post on Bruce group - they demand phone number. LOL

robski

@geex3 is your rfid 2 works ok with uiflow2 or arduinoon same devices?

geex3

@robski said in RFID 2 + cardputer or stickC-plus2:

uiflow2

I have only tested my rfid 2 module with cardputer and stickC-plus2 with Bruce fw on board.

robski

@geex3 so test it first with official firmware/software to know if it works correctly

MWoods

Your authentication failed because you are missing the keys for the rfid card. It does work in bruce but it`s really slow.
you should notice that it does work when it pops out the uuid.
Somehow Bruce seem to have trouble when you have to many custom keys on the key file try to keep it a really short list.