The only way I found was to copy the Python code from UIFLOW2, paste it in Thonny and save it as a .py file. Then upload it using the WebTerminal in UI FLoW 2 interface

@mtchoy_comp Same issue here.. any news about it ?

The only way I found was to copy the Python code from UIFLOW2, paste it in Thonny and save it as a .py file. Then upload it using the WebTerminal in UI FLoW 2 interface

Here is how I made it work:

• CS Connects also to GND in M5.
• Some Card adapters requires 5V to work (bigger ones)
• Card must be formatted as FAT32
• SD card capacity <=32G