No Support for SKU:M121 4-Relais Module
Please add it.

Save
Saving
Alf
@Alf
0
Reputation
4
Posts
1439
Profile views
0
Followers
0
Following
Posts made by Alf
-
No Support for SKU:M121 4-Relais Module
-
Color Sensor RGB Unit UI 1.3.2 (TCS3472) / R G B Data always on 0
My sensor only shows me the RAW data.
The values of R G B (single) are always 0.UI V1.3.2 / V 1.4.0
Contains a calibration table which is probably wrong:
- values smaller than 0 must be set to zero
If the calibration table matches the integration time of 154 MS. The Arduino example assumes 50 MS.
3 The module reacts logarithmically. So it should not be approximated with a 3rd degree function !
Could this be checked?
I would like to make an instruction video on my Youtube channel (UI Flow),
but I can't get any further.Alf
- values smaller than 0 must be set to zero
-
RE: Color Sensor RGB Unit (UI Flow) (TCS3472) Data
I'm a beginner, and I don't know if I did anything wrong.
Please have a look at my picture.thanks alf
-
Color Sensor RGB Unit (UI Flow) (TCS3472) Data
When I read the sensor data , I always get 255 on RGB only with the RAW data I see that something changes when the color changes.
Is there a table or do you have to do something before reading the data?
If anyone can help me, I'd be very grateful.
greet Alf