so i asume its fixed now then?

i also ran in to the problem a while ago turned out if you activate the burner it works to

i fixed it now turned out the cable cracked while setting evrything up. so it just didnt see the second engine anymore.

i have 2 stepper motors. and a steppermotor module with conections up to 3 stepper motors. tho i cant seem to drive them the way i want to. for some reason the X axcis stepper motor wil also do what the y should do. any one know how i can fix this? Thanks in advance

so i asume its fixed now then?

i also ran in to the problem a while ago turned out if you activate the burner it works to

i have been working on a espnow conection between the M5Stick and the M5stack gray core. but they dont seem to be able to get a connection between the two i have been using this code

it works between 2 sticks but not between the core and a stick any one know what im doing wrong?

i did change the platform to the core ofcourse for the cores program

@ajb2k3 i started with it and i had the conections between 2 sticks running in no time. but im running into a problem with my M5Stick and M5Stack gray core. for some reason they dont get messages from one another. i used this program on al my devices it worked for the sticks. i did change the module to stack for the core. maybe something went wrong there do you have any idea?

thank you il look into those functions then!

im trying to establish a connection between the 2 so i can control the m5grey core with the wirelesscontroler stick hat.
im trying to make a camera slider so it doesnt need to have lots of functions. just a basic data send should be fine. also the rest of the code was written in uiflow block langauge. so would be nice if this vcould be done there to.