Topics created by kokany

Hello @MitchBuckanon

like @robski mentioned, M5Dial has two ports: A and B which gives you 4 GPIOs you can use. In my test I configured the GPIOs like below:

#define ETH_PHY_CS 1 #define ETH_PHY_IRQ -1 #define ETH_PHY_RST -1 #define ETH_SPI_SCK 13 #define ETH_SPI_MISO 15 #define ETH_SPI_MOSI 2

Below is how I wired M5Dial to the LAN module (using a Bus Module) and some Grove/Dupont cables.
M5Dial_to_LAN_via_Bus_Module_20260302.png

Hope this helps.

Thanks
Felix

Hello @kokany

interesting... and thank you for sharing.

Thanks
Felix