The cause of the problem is that I selected GPIO0 as SPI slave select at USBv1.2 module.
Regards,
Markel
The cause of the problem is that I selected GPIO0 as SPI slave select at USBv1.2 module.
Regards,
Markel
Hi,
I am trying the code in this post for text to speech but there is no output sound. What should I do to make this work?
Markel
I just modified the HID mouse example program. It works for my requirements.
Regards,
Markel
Hi,
I have a Core2 for AWS and USB v1.2 module. I am going to connect USB 1D/2D barcode reader to it. The HID Keyboard example program will work for barcode reader. What example program from this library should I use? https://github.com/m5stack/M5-Max3421E-USBShield/tree/master
Regards,
Markel
It still happens. Any permanent solution to the problem>
The cause of the problem is that I selected GPIO0 as SPI slave select at USBv1.2 module.
Regards,
Markel
Hi,
Using Arduino IDE I am able to program hello example program with M5Stack Core 2 for AWS and M5GO Bottom2 for AWS connected.
However, with M5Stack Core 2 for AWS and USB v1.2 module. I get error "Failed to connect to ESP32: Wrong boot mode detected (0x17)! The chip needs to be in download mode".
How do I solve this problem?
Regards,
Markel
Hi,
I would like to know if the USB Module with MAX3421E will work with a 1D/2D/QR Barcode Scanner.
From my reading the USB Module with MAX3421E will work with ESP32 Basic Core Controller.
I would also need to store Barcode data to Flash as reference information. I would like to know if using the SPI Flash would conflict with using the USB Module which also use SPI.
Regards,
Markel