Hello @Slyke

Tasmonizer did not work for me either. VSC/PlatformIO only worked with version 9.5.0. (Version 9.6.0 or master don't compile for me.)
Here are the steps:

Clone Tasmota: git clone https://github.com/arendst/Tasmota.git Checkout 9.5.0: git checkout pre-release-9.5.0 Rename sample file: mv platformio_override_sample.ini platformio_override.ini Open project in VSC/PlatformIO Modify platformio_override.ini: comment out: tasmota / uncomment: tasmota32-core2 Compile & Link & Download from within VSC/PlatformIO

Note: there is nothing on the LCD screen at this point. I think the device is waiting to be configured.

Serial output:

00:00:00.001 HDW: ESP32-D0WDQ6-V3 00:00:00.011 UFS: FlashFS mounted with 10292 kB free 00:00:00.031 CFG: Loaded from File, Count 5 00:00:00.036 QPC: Count 2 00:00:00.038 SPI: Hardware using GPIO18(CLK), GPIO23(MOSI) and GPIO38(MISO) 00:00:00.248 I2C: AXP192 found at 0x34 00:00:00.250 I2C: RTC found at 0x51 00:00:00.257 BRY: Berry initialized, RAM used=1760 00:00:00.261 BRY: no 'preinit.be' 00:00:00.837 I2C: FT5206 found at 0x38 00:00:00.837 DSP: ILI9341 00:00:01.409 Project tasmota Tasmota Version 9.5.0(core2)-1_0_6(2021-10-21T09:48:12) 00:00:01.409 UFILESYSTEM OK! 00:00:01.515 CR2: Set time from BM8563 to RTC (UTC) 2000-02-04T13:00:32, (DST) 1970-03-29T02:00:00, (STD) 1970-10-25T03:00:00 00:00:01.521 BRY: no 'autoexec.be' 00:00:01.818 WIF: WifiManager active for 3 minutes 13:00:33.537 HTP: Web server active on tasmota_C50340-0832 with IP address 192.168.4.1 13:00:39.532 QPC: Reset

Thanks
Felix