@stunt_bot If you don't know, HOW should we?

There are a few options:

• Battery is empty
• No firmware flashed
• Firmware is flashed, but enters wrong mode (no Python-script to load)

To troubleshoot:'

• connect the device to the computer with a cable.
• Install drivers, if necessary. Link: https://docs.m5stack.com/en/download
• Maybe it is necessary to restart the comuter at this point.
• Open a browser and go to: https://uiflow2.m5stack.com/ and login.

• Your browser should ask you to connect to a serial device. Select the right COM-Port.
• and then a consolewindow should start.
• Look at the output on that window.

If the console window tells you something like UIFlow, bla bla, then maybe you neet to upload a python file OR flash another firmware (depending on your needs)

If the console window stays blank, uh oh! I don't know! Maybe you have erased previousely installed firmware and need to reflash it.

Maybe you need to flash a firmware with the M5 Burner available at: https://docs.m5stack.com/en/uiflow/m5burner/intro

I hope I could help a bit.

S B