Topics created by xs

Well if someone like me need a working example, the support provided me with this file and it works:

https://github.com/m5stack/M5Core2/blob/master/examples/Module/SERVO2_PCA9685/SERVO2_PCA9685.ino

@felmue said in GoPlus2 Port B with servo with UIFlow:

Hello @xs

I think you are out of luck here. A servo requires a PWM (pulse wide modulation) signal, however the three B ports on the GoPlus2 are only good for simple input and output signals but cannot do PWM.

The GoPlus2 description reads: Three PORT-B interfaces(Analog Input,Digital Output,Digital Input) can be expanded.

And looking at the GoPlus2 blocks in UIFlow the digital output can only be set to 0 or 1, but nothing like PWM.

Thanks
Felix

Thanks, that's what I want to know. I'll use the B Port in the M5Go base instead. Thank you so much.