M5Burner does not work in MacOX 12.3.

lmartu68

Hello,

I tried re installing python 3 and running the executable from the command line but I get a Java error
Has anyone got this to work?
Its frustrating!

lmartu68

this is the error I get

Uncaught Exception:
Error: spawn python ENOENT
at Process.ChildProcess._handle.onexit (internal/child_process.js:264:19)
at onErrorNT (internal/child_process.js:456:16)
at processTicksAndRejections (internal/process/task_queues.js:80:21)

yopita

I had the same problem.
I referred to joshrhyked's post, and I succeed burn with the following steps.

Start Terminal App.
Install homebrew.
Please refer to the installation on the page.
https://brew.sh/
Install python3
Please type the command.
$ brew install python3
Put a symbolic link
$ sudo ln -s /usr/local/bin/python3 /usr/local/bin/python
Start M5Burner on Terminal
$ /Applications/M5Burner.app/Contents/MacOS/electron-m5burner-v2-eletron

best of luck to you!

ajb2k3

@yopita said in M5Burner does not work in MacOX 12.3.:

I had the same problem.
I referred to joshrhyked's post, and I succeed burn with the following steps.

Start Terminal App.

Install homebrew.
Please refer to the installation on the page.
https://brew.sh/

Install python3
Please type the command.
$ brew install python3

Put a symbolic link
$ sudo ln -s /usr/local/bin/python3 /usr/local/bin/python

Start M5Burner on Terminal
$ /Applications/M5Burner.app/Contents/MacOS/electron-m5burner-v2-eletron

best of luck to you!

Step 4 is not correct but I see it worked for you.
Open terminal and go to settings, you should be able to add /usr/local/bin/python3 to the environmental setting or find the environmental file and add it it there.

waqast

@yopita
https://github.com/Xinyuan-LilyGO/LilyGo-T-Call-SIM800/issues/139#issuecomment-1014816668

It worked for me

System:
MacOS Monterey 12.3.1 (Macbook Pro 2019 Intel)

Device
M5Stack Core2

Install the driver CH9102_VCP_MacOS_v1.7 > CH34xVCPDriver.pkg
Run the app CH34xVCPDriver in Applicatoins
GO TO Security on Settings and allow the app to run
Start Terminal App.
Install homebrew.
Please refer to the installation on the page : https://brew.sh/
Install python3
Please type the command.
$ brew install python3
Put a symbolic link
$ sudo ln -s /usr/local/bin/python3 /usr/local/bin/python
Start M5Burner on Terminal
$ /Applications/M5Burner.app/Contents/MacOS/electron-m5burner-v2-eletron
Select COM port wchusbmodem

westwoodhk

@waqast

I couldn't solve it.

When I input this command

$ sudo ln -s /usr/local/bin/python3 /usr/local/bin/python

it comes out this message

ln: /usr/local/bin/python: File exists

Do someone know how to solve this?

Thanks

ajb2k3

You need to set the path in BASH's environment setting (if bash is still used) google for setting Micropython Environmental Patch in OSX. I can't help because my OSX is several version behind and won't be updated until I can afford to by a new MAC.

rickkaye

@waqast When I follow these instructions, wchusbmodem does not show up as an available port in M5Burner. I checked in /dev and it is not there. The only port that M5Burner offers to me is /dev/tty.Bluetooth-Incoming-Port. My hardware is 2017 iMac5k MacOS Monterey12.3.1, M5Stack Core. Can anyone help?

oyouji

@rickkaye Try to turn M5stack off, then plug it in! Do not turn it on by yourself.

ajb2k3

@rickkaye Take a look in "Security and preferences" to see if the driver has been blocked.

plusulli

I updated today to macOS Monterey V 12.3.1 and everything is fine with M5Burner MacOS x64 v3.0

mashimolab

hello,
I could resolve the problem by changing the part of putting a symbokic link like below.

sudo ln -s /opt/homebrew/bin/python3 /usr/local/bin/python

The install path of python3 with homebrew is changed to /opt/homebrew/bin directory as the default in M1 mac.

System:
MacOS Monterey 12.3.1 (Macbook Pro 2021 M1 Pro Max)

Device
M5Stack Fire

yu_with_a_mission

@yopita
I tried you way and get another error,
"File"/Applications/M5Burner.app/Contents/Resources/packages/tools/serial/tools/list_ports_osx.py", line 32, in <module>
kIOMasterPortDefault = ctypes.c_void_p.in_dll(iokit, "kIOMasterPortDefault")
ValueError: dlsym(RTLD_DEFAULT, kIOMasterPortDefault): symbol not found

=================
Burn Failed
================="
How can I solve?

System:
MacOS Monterey 12.4
Device:
M5StickCPlus

ajb2k3

@yu_with_a_mission said in M5Burner does not work in MacOX 12.3.:

@yopita
I tried you way and get another error,
"File"/Applications/M5Burner.app/Contents/Resources/packages/tools/serial/tools/list_ports_osx.py", line 32, in <module>
kIOMasterPortDefault = ctypes.c_void_p.in_dll(iokit, "kIOMasterPortDefault")
ValueError: dlsym(RTLD_DEFAULT, kIOMasterPortDefault): symbol not found

=================
Burn Failed
================="
How can I solve?

System:
MacOS Monterey 12.4
Device:
M5StickCPlus

There is an Issue Montery.
Have you installed Xcode from the App Store?
Have you instilled the latest Python 3 from the python site?
Have you installed the drivers?
Have you set the PATH variable correctly?
Have you copied the M5Burner V3 to the Applications folder?
Have you erased the controller first before writing the correct firmware?