yes that's right I have given up hope
plusulli
@plusulli
Posts made by plusulli
-
RE: Zeitmessung mit M5Stack (Core)
@spiderplig said in Zeitmessung mit M5Stack (Core):
Hallo zusammen
Ich nutze einen M5Core (M5GO IoT Starter Kit V2.6) und möchte eine Zeitmessanlage für ein RC-Fahrzeug bauen.
Die Programmierung des Timers (Messung der Rundenzeiten) sollte ich hinkriegen.Mein Problem ist vielmehr, welchen Sensor kann ich am besten für eine Zeitmessung verwenden?
Ich benötige daher eine Lichtschranke oder etwas ähnliches. Ich habe leider aber keinen passenden Sensor von M5STack gefunden.Ich habe es bereits mit dem PIR Sensor versucht. Funktioniert grundsätzlich, jedoch hat dieser leider eine Verzögerung von 2 Sekunden.
Habt Ihr eine Idee/Vorschlag für einen geeigneten Sensor für mein Projekt? Evt. sogar ein einfaches Programm dazu?
Grüsse Manuel
ich würde die Sensoren "Laser TX und Laser RX" nehmen
-
RE: M5Burner does not work in MacOX 12.3.
I updated today to macOS Monterey V 12.3.1 and everything is fine with M5Burner MacOS x64 v3.0
-
RE: How to control lots of Neopixel
wled on M5stack is easy I have tested it with ATOM LITE, ATOM U, and ATOM MATRIX especially ATOM MATRIX is easy it comes with the LED. Simply install via WEB
https://install.wled.me -
RE: UIFLOW 1.9.1 NO LONGER UPLOADING FIRMWARE URGENT!!!!!!
therefore it would be important that there should be a current Uiflow desktop
-
RE: M5Burner Mac Update
@ajb2k3 I have a timer camera, so I tested that. And yes, I work with a Mac.
-
RE: M5Burner Mac Update
Nobody seems to care that Mac owners can't use the TimerFolderPusher function because it doesn't work with M5burner V2.3.0.
-
M5Burner Mac Update
The m5Burner for the Mac needs an update because the TimerFolderPusher does not work the image is flashed but no settings can be made
-
RE: P2P communication using two Atom Matrix
I think EspNow would be the right one for this
-
RE: UIFlow 1.8.9
after switching to German I can not use Uiflow
After that I have to clear the browser cache so that Uiflow starts again
with the English versionwhat is Smart Config Support?
due hope for a C3 support I have given up