Object has no attribute - Error

RIDDSprojects

It's very simple. The steps I do:

Add unit (+) in UIFlow
Add DIGI-CLOCK, default setting (Port A)
2b. OK
Open tap 'Units (1)' (under 'Hardwares') > Digi Clock
Get block 'digi_clock_0 init 12c address (0x30).
Run

Error: File "<string>", line 8, in <module>
AttributeError: 'module' object has no attribute 'DIGI_CLOCK'

Add other blocks; does not matter
Grab another controller; makes no difference (also error).

Controlling directly with I2C is possible:
(remove unit)
Tap 'Hardwares', I2C Master:
Block 1: i2c0 Master portA freq 400000
Block 2: i2c0 Set slave addr 0x30
Block 3: i2c0 Write reg 0x4 one byte 0xFF
Display result: 8. (and no error!)

Who can help me or has an addition?

felmue

Hello @RIDDSprojects

is your M5Stack running the latest UiFlow firmware (v1.10.9)? You can install it with M5Burner v3.0.

Thanks
Felix

RIDDSprojects

Dear Felix,
You helped me a lot! I had already looked several times for a firmware update, but it got stuck at v1.9.8. Thanks for your tip to use M5Burner Version 3 - I used M5Burner Version 2.5.1 myself. Confusing, but now clear! With, now v1.11.0, it works well!
Thank you! Also for your very quick response.

felmue

Hello @RIDDSprojects

you are very welcome. I am glad to read it works for you now. And thank you for reporting back.

Best of luck with your projects.

Thanks
Felix