GoPlus2 2x DC Motor Cable connector type please
-
Flyer states XH2.0-2P, but I cannot confidently locate or source.
Could they be XH2.54-2P/XH2.5-2P? Or maybe a PH2.0-2P?
Dimensions seem more like XH -
@gavin67890 "Could they be XH2.54-2P/XH2.5-2P?" the 2.54 and 2.5 is the pin spacing, so you can rule them out! The old DIP IC package was 0.10 inches (2.54mm).
Here is the DigiKey page for JST:
https://www.digikey.ca/en/product-highlight?f=1315853904&f=1972742469
Both PH and XH are listed with specs, so you can see how they differ.
-Terry -
Hi @teastain,
Cool, thanks. I went ahead and ordered at risk JST XH 2-pin from Adafruit, 2.5mm seems spot on for the connectors of GoPlus2. http://adafru.it/4872
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login