Debug CoreS3
-
Is there a way of getting a debugger attached to CoreS3? From schematics it appears the GPIO19/20 for JTag is exposed on an internal J6 plug which I cannot find (HDR4 2MM). Is this this the correct way? looking at the plug it seems to be 1.25mm pitch 4pin which I think is a molex Picoblade. Can anyone confirm this?
Thanks
-
Looking at the image on the specs site, there is no connector on the DP/DN pins however I've tried a 4pin Molex Picoblade and it fits perfectly.

I've made up a USB cable attached to the DP/DN connector but still cannot get it to debug.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login