@sistar_hh 1
This is normal, as download premaritally set the program to start on boot.
To reset you have to use M5Burner to change the boot configuration.

Yes, OTA only work in test mode (the "> Run" button if you download, wifi is not activated an you will need to manually activate the wifi interface and connect to the target wifi.

@Andreu You can try running the M5Burner to reflash your M5 AirQ with a good code. This may correct your problem.

@sonic_grin
Я думаю, вам следует прочитать документ и внимательно изучить принцип, прежде чем задавать вопросы: https://docs.m5stack.com/en/unit/Unit LoRaE220-433

Use a compatible RFID reader, authenticate if necessary, and send read commands via software or microcontroller in order to read a block from an RFID tag. Make sure that proper protocols are followed (LF, HF, UHF) and that data is retrieved securely. Integration of identification and access control systems enhances their efficiency.

Looks like the code, with the modification you've suggested works! I can get the coordinates of the touch that lead to the wake up of the M5. Thanks!

@figgalicous The desktop IDE hasn't been updated in a while. The Web version gets updated weekly.

I bought and tested an I/O expansion unit called U011-B.

As a result, I was able to successfully read four I/O signals from the M5StickC Plus from U011-B during using WiFi.

@UIgAVvwEs Is there any way to do this without Linux? I need to do this exact thing but I can only be on windows

@Arn_8
Problem fixed !
Thanks !