Looking for the Base Firmware for Unit-V

kylebuttress

I'm looking for the Base Firmware for Unit-V, I was experimenting and have made a mistake with the unit-v and would like to know where I can get the base firmware so I can reflash to its default.

Thanks

ajb2k3

http://community.m5stack.com/topic/1872/m5stickv-firmware_v5-1-1_beta

kylebuttress

Is there a correct way to flash the firmware using esptool i'm using esptool.py --chip esp32 --port /dev/tty.SLAB_USBtoUART --baud 115200 write_flash -z 0x1000 M5StickV_Firmware_v5.1.1_beta.kfpkg becuase even though it seems to flash I cannot connect with Maixpy i'm getting the following Connect fail, board ide mode no ack

Any tips would be appreciated.

thanks Kyle

Thrasher

Esptool can't flash it, its not an esp chip
You need stickV burner from guides section

https://docs.m5stack.com/#/en/core/m5stickv

EasyLoader is

m5stack

the M5StickV/UnitV burn firmware tutorial

https://docs.m5stack.com/#/en/quick_start/m5stickv/m5stickv_quick_start