M5Stack Official ESP32 Camera Module - Demo, Runtime Error

0x1abin

Hi, try prebuilt firmware:
https://github.com/m5stack/esp32-cam-demo/blob/m5cam/m5cam-firmware.zip

Calin

@bin 在 M5Stack Official ESP32 Camera Module - Demo, Runtime Error 中说：

Hi, try prebuilt firmware:
https://github.com/m5stack/esp32-cam-demo/blob/m5cam/m5cam-firmware.zip

That firmware should do... if the hardware is OK

@pksuf07 在 M5Stack Official ESP32 Camera Module - Demo, Runtime Error 中说：

@calin

Did you mean soder directly on ESP32 chip pinout?

Well... yeah... if you are determined to debug...

pksuf07

@bin

Hi Bin,
This works. It probed camera good and got connected. Can you enlighten me there is any changes in the source code?

I (0) cpu_start: App cpu up.
I (361) heap_init: Initializing. RAM available for dynamic allocation:
I (368) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (374) heap_init: At 3FFB9E48 len 000261B8 (152 KiB): DRAM
I (380) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM
I (386) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (393) heap_init: At 400907AC len 0000F854 (62 KiB): IRAM
I (399) cpu_start: Pro cpu start user code
I (193) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (283) camera_demo: Detected OV2640 camera, using JPEG format
I (503) camera_demo: ESP_WIFI_MODE_AP
I (503) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (503) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (593) phy: phy_version: 3910, c0c45a3, May 21 2018, 18:07:06, 0, 0
I (603) camera_demo: wifi_init_softap finished.SSID:M5Cam password:
I (603) camera_demo: Open http://192.168.4.1/jpg for single image/jpg image
I (613) camera_demo: Open http://192.168.4.1/jpg_stream for multipart/x-mixed-replace stream of JPEGs
I (623) camera_demo: Free heap: 142392
I (623) camera_demo: Camera demo ready

pksuf07

@calin

Thanks for advice. I feel sorry I do not have skill and equipment to solder ESP32 Chipset pint out for debugging which I would love to learn to .

@Bin
I will try.

Calin

@pksuf07 在 M5Stack Official ESP32 Camera Module - Demo, Runtime Error 中说：

@calin

Thanks for advice. I feel sorry I do not have skill and equipment to solder ESP32 Chipset pint out for debugging which I would love to learn to .

@Bin
I will try.

Here is my M5Stack debug setup: a "home made" Jtag, some ESP32 board and a ILI9341 TFT.
And M5Stack device running (almost) the same code :)

Too bad the actual M5Stack don't have a touchscreen... i can use the touchscreen on the debug "setup" :)

pksuf07

@calin

Appreciated your information and picture.

I am already able to configure the debugging setup. I have done it but I could not with ESP32CAM.

By the way, it seems to me that you are using platform I/O which I do not use. So, I will try as per your configuration.

And I do not have m5stack core and accessory units except ESP32CAM.

In fact I am interesting ESP32CAm only if it can handle some real time application because I believe it can off-load some of processing with ESP32, especially by pipelining processing frame while it streaming. For example stereo vision for distance. This is just hobbiest's thought.

Thanks,
:)

Calin

I can't debug on M5Stack Core because it use GPIO 14 as TFT CS and that's interfering with Jtag TMS line.
That's why i made this setup for debugging.

pksuf07

@calin
Understood. I am sorry I do not have M5Stack core. Only ESP32CAM. I now understand your setup little bit.

I should keep in touch with you more to learn from you more.

pksuf07

@bin

Hi bin,
Can you give little information on the changes or setup I am missing? I tried to make this as STA and giving static ip address. The firmware you uploaded is good for softAP.
Thanks,

0x1abin

@pksuf07 Hi, This is the ESP32CAM pinout
https://github.com/m5stack/esp32-cam-demo/blob/m5cam/main/Kconfig.projbuild#L44

dda

@0x1abin The prebuilt firmware doesn't work for me either. I get this:

[0;32mI (362) heap_init: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (369) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM[0m
[0;32mI (375) heap_init: At 3FFB9E48 len 000261B8 (152 KiB): DRAM[0m
[0;32mI (381) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM[0m
[0;32mI (387) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM[0m
[0;32mI (394) heap_init: At 400907AC len 0000F854 (62 KiB): IRAM[0m
[0;32mI (400) cpu_start: Pro cpu start user code[0m
[0;32mI (194) cpu_start: Starting scheduler on PRO CPU.[0m
[0;32mI (0) cpu_start: Starting scheduler on APP CPU.[0m
[0;31mE (306) camera_demo: Camera probe failed with error 0x20001[0m

Faulty device?