LORA-MODULE-868MHZ and LoRaWAN

[remaille]

Hi,

I am using LORA-MODULE-868MHZ with LMIC stack for a device in a LoRaWAN network.

I successfully join the network. It sends three packets and then nothing else.

My pinmap seems correct.

But if I look at the scematic below, DIOx are not connected...

So my guess is that we can not do LoRaWAN with this module but only "raw LoRa".

Am I right ? It is not clear in the documentation.

Thanks.

[felmue]

Hello @remaille

it should work with LoRaWAN, but as you already mentioned DIO1 needs to be connected to a GPIO on the M-Bus. I found this article (sorry, it's in German).

Thanks
Felix