M5Stack Module and Sensor power specs

[timbobot]

I've been looking at M5Stack modules and sensors for different application possibilities. I know that the
calculation of power consumption is complicated but it can be broken down to some degree so the
information can be helpful when considering use of these products.

Is there information available on power consumption for each module and sensor. The uC mode
is one piece but the regulators (glue logic) surrounding key components in each device can be
determined and documented.

With Battery operation in mind, sensors would be sampled at a low frequency (depends) and
the processor put to sleep and when possible woken up by interrupt or timer. These practices
help reduce average power.

If M5Stack published/documented this information it would be of great help in choosing whether
to commit to M5Stack hardware.

Thanks