(Core2 AWS) LCD does not light up

hiranobu

Hello, I am a Beginner.
The LCD on my Core2AWS has stopped lighting up.
The power seems to be on, writing is normal, and when I restore the firmware to its initial state with M5Burner, the LCD lights up again, so it does not seem to be a hardware failure.

After writing the sketch using ArduinoIDE, the LCD will not light up.
I would appreciate any good advice you can give me.
I posted this using an automatic translation service. Sorry if it was funny English.

felmue

Hello @hiranobu

have you tried a simple sketch like this one? Does that work?

Thanks
Felix

ajb2k3

Have you made sure that you are restoring Core2 firmware and not core firmware.

villagertechnology

@hiranobu pou said in (Core2 AWS) LCD does not light up:

Hello, I am a Beginner.
The LCD on my Core2AWS has stopped lighting up.
The power seems to be on, writing is normal, and when I restore the firmware to its initial state with M5Burner, the LCD lights up again, so it does not seem to be a hardware failure.

After writing the sketch using ArduinoIDE, the LCD will not light up.
I would appreciate any good advice you can give me.
I posted this using an automatic translation service. Sorry if it was funny English.

You should try bringing it to the store. They can better assist you

robski

@hiranobu said in (Core2 AWS) LCD does not light up:

Hello, I am a Beginner.
The LCD on my Core2AWS has stopped lighting up.
The power seems to be on, writing is normal, and when I restore the firmware to its initial state with M5Burner, the LCD lights up again, so it does not seem to be a hardware failure.

After writing the sketch using ArduinoIDE, the LCD will not light up.
I would appreciate any good advice you can give me.
I posted this using an automatic translation service. Sorry if it was funny English.

does it work if you use UIflow?