4. M5Tough - RS-485 in Uiflow2

M5Tough - RS-485 in Uiflow2


  • Hi,
    Is build in RS-485 in to M5Tough controller supported in uiflow2?
    Can't see it in Hardware options. No Modbus blocks like when RS-485 module/unit added.

    0_1711028743334_toughrs485.jpg
    0_1711029043128_toughrs4850.jpg
    0_1711029057046_toughrs4851.jpg

    0

  • Hello @robski

    you can use the blocks of the Modbus unit (with modified TX/RX pins) to control the internal Modbus interface.

    Please see Play Zone example M5Tough_Internal_Modbus_ACSSR_UIFlow2.0.3.

    Thanks
    Felix

    0 1 Reply

  • @felmue said in M5Tough - RS-485 in Uiflow2:

    Hello @robski

    you can use the blocks of the Modbus unit (with modified TX/RX pins) to control the internal Modbus interface.

    Please see Play Zone example M5Tough_Internal_Modbus_ACSSR_UIFlow2.0.3.

    Thanks
    Felix

    Ok, understand, add "virtual unit" and reconfigure pins for internal extension, thx.

    0