AirQuality v1.1 restarts roughly every minute
-
Hi there,
I recently got my hands on an AirQuality v1.1 together with the Stamp S3A. I went through the quick start guide, and tried connecting it up to WiFi, but it seems to reset itself every minute. When this happens there is a bleep sound, and the screen flashes black. This regular bleeping makes it not particularly desirable to have in my living environment.
I've noticed a few things:
- The temperature readings seem to be much higher than the actual temperature. Some other posts mention this for other air quality meters, and it is not a must for my project
- I am powering the device via the USB C cable on the Stamp board. Is this a problem, or should it be charged via the 5Vin pin?
I asked the GPT for M5Stack, and it recommended flashing the firmware using M5Burner to ensure its not a corrupted firmware issue. Is this really a likely cause (out of the box), and if so which firmware should I flash?
All the best,
Kforjf -
you can disable sound and adjust timer, 60s for reset is default it does flash black like many ink displays
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login