[Solved] M5 Burner Firmware Option Update

ajb2k3

which os are you on?

OSX - http://flow.m5stack.com/download/M5Burner_MacOS.zip

Windows - https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/software/M5Burner.zip

GACHAPO

Windows 10.

Never loads any other versions of firmware other than the ones listed above.

ajb2k3

@gachapo

the windows link i posted is the uiflow firmware loader but it has the camera firmware in the package.

GACHAPO

Thanks for coming back to me.

So which one do I choose please?

ajb2k3

For the MK1 (no case) use cam0.02
For the MK2 with PSRam use M5Cam-psram
I do believe the fisheye also uses the M5Cam-psram firmware.

GACHAPO

For the MK1 (no case) use cam0.02

This is my camera;

I have UIFLow-v 1.2.3-en loaded and I have setup an IP address but nothing is loading.

The options I have are on the image I loaded - I see no cam0.02?

Thanks

ajb2k3

@gachapo There should be an option in the top dropdown box to select it.

alt text

Click on the box next to firmware

ajb2k3

Click on the M5Flow-v1.2.1-en and a box will drop down, scroll through the list and the cam firmware is near the top.

GACHAPO

That's my point - there's nothing more than the image I sent.

The only choices I have are on the left and the only drop down boxes are at the top and relate to the COM port and Baud rate??

ajb2k3

@gachapo said in M5 Burner Firmware Option Update:

That's my point - there's nothing more than the image I sent.

The only choices I have are on the left and the only drop down boxes are at the top and relate to the COM port and Baud rate??

Sorry No image has appeared.

GACHAPO

ajb2k3

@gachapo said in M5 Burner Firmware Option Update:

Um, something is not quite correct there!
@watson

ajb2k3

An alternative is that you can download the source code and compile it yourself.

GACHAPO

I could, if I knew how.

I was hoping somebody would know why I cant use the burner?

m5-docs

Hello @GACHAPO @ajb2k3,

Now, you could burn camera board firmwares through the lastest m5burner. Please download the lastest version from www.m5stack.com

GACHAPO

@watson Thanks for coming back to me.

I have downloaded the new version and I have tried all three versions of cam software. None of them go into AP mode so I can browse to them. I have the Camera without the case so can you please let me know which software I use and how I get it sdet up beyond download.

Thanks

m5-docs

@gachapo Download a new one from www.m5stack.com, then burn ESP32CAM-v1.0.0. Your board is named ESP32CAM.
Here's the doc for it.
https://docs.m5stack.com/#/en/unit/esp32cam

GACHAPO

That's great thank you - works.

Is there any documentation about how to assign your own IP address to the camera please?

m5-docs

@gachapo Do you mean this doc?

https://docs.m5stack.com/#/en/quick_start/m5camera/m5camera_quick_start

GACHAPO

Hi,

I've see that document and youtube video. I just need to know how to move the camera from M5stack AP connection on 192.168.4.1 to an assigned ip address by myself like 192.168.1.131?

Thanks