[Solved] M5 Burner Firmware Option Update
-
**M5 Burner Firmware Option Update **
Hello,
New to all of this so please treat me kindly.
I have downloaded the M5 Burner, but the only firmware options I have is for the stick. I need the M5 Cam firmware. Can anybody please advise?
Thanks in advance!
-
which os are you on?
OSX - http://flow.m5stack.com/download/M5Burner_MacOS.zip
Windows - https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/software/M5Burner.zip
-
Windows 10.
Never loads any other versions of firmware other than the ones listed above.
-
the windows link i posted is the uiflow firmware loader but it has the camera firmware in the package.
-
Thanks for coming back to me.
So which one do I choose please?
-
For the MK1 (no case) use cam0.02
For the MK2 with PSRam use M5Cam-psram
I do believe the fisheye also uses the M5Cam-psram firmware.
-
For the MK1 (no case) use cam0.02
This is my camera;
I have UIFLow-v 1.2.3-en loaded and I have setup an IP address but nothing is loading.
The options I have are on the image I loaded - I see no cam0.02?
Thanks
-
@gachapo There should be an option in the top dropdown box to select it.
Click on the box next to firmware
-
Click on the M5Flow-v1.2.1-en and a box will drop down, scroll through the list and the cam firmware is near the top.
-
That's my point - there's nothing more than the image I sent.
The only choices I have are on the left and the only drop down boxes are at the top and relate to the COM port and Baud rate??
-
@gachapo said in M5 Burner Firmware Option Update:
That's my point - there's nothing more than the image I sent.
The only choices I have are on the left and the only drop down boxes are at the top and relate to the COM port and Baud rate??
Sorry No image has appeared.
-
-
@gachapo said in M5 Burner Firmware Option Update:
Um, something is not quite correct there!
@watson
-
An alternative is that you can download the source code and compile it yourself.
-
I could, if I knew how.
I was hoping somebody would know why I cant use the burner?
-
Now, you could burn camera board firmwares through the lastest m5burner. Please download the lastest version from www.m5stack.com
-
@watson Thanks for coming back to me.
I have downloaded the new version and I have tried all three versions of cam software. None of them go into AP mode so I can browse to them. I have the Camera without the case so can you please let me know which software I use and how I get it sdet up beyond download.
Thanks
-
@gachapo Download a new one from www.m5stack.com, then burn
ESP32CAM-v1.0.0. Your board is namedESP32CAM.
Here's the doc for it.
https://docs.m5stack.com/#/en/unit/esp32cam
-
That's great thank you - works.
Is there any documentation about how to assign your own IP address to the camera please?
-
@gachapo Do you mean this doc?
https://docs.m5stack.com/#/en/quick_start/m5camera/m5camera_quick_start
