@mrsteveman1 Hi there! I will forward your request to our technical support, thank you for letting us know!

What have you been up to in 2022 so far? We are sure your next project is coming along! Ever since The #M5Stamp series came out, we have already seen some of you using it on some awesome projects! We want to unlock more of your potential and show us what you are working on in your story by using the tag #M5Project. and we will share it with our followers!

How to enter:

Post a photo or video of any project using the #M5Stamp series such as M5Stamp Pico/ C3 / C3U. you name it!

Use the hashtags – #M5Project and @M5Stack official account– in the caption.
Multiple entries are allowed.

Must be following us to be eligible.

Giveaway ends 4/15/22, and we will be notifying the winner via DM.

See official rules at👉https://bit.ly/3suHaWc

@felix22 Hi there, please wait for the UIflow 2.0

@kawabatapaper Hi there! Can you please provide the program? and also every time the error occurs in about 9 hours?

@lagd sorry they will fix it in one week

@mrsteveman1 Hi there! I will forward your request to our technical support, thank you for letting us know!

@paopao Hi! If using UIFlow, then this is it, if it‘s Arduino. Serial port sending commands
or use API， then CH_index = 1

https://github.com/m5stack/M5Stack/blob/master/examples/Unit/UHF_RFID_JRD4035/RFID_command.cpp

@dsrc12 Hi! This must be outdoors in wide-open areas, cold start time takes about 3 / 4 minutes

@lishengkkk Hi there, please check if the baud rate of both sides match (you can also try to change the baud rate, such as the common 115200). If it's a UART via separate wiring. Please make sure TX RX is connected correctly.

@k_hara Hi, We are fixing it! sorry for the inconvenience

@mpierce Hi, We are fixing it! sorry for the inconvenience

@lagd Hi, We are fixing it! sorry for the inconvenience

@hoodlem Hi! Thanks for the feedback! this is already on our lists! stay tuned for more