Topics created by AndreaF

@andreaf said in How to change LCD print text on runtime without creating another line:

M5.Lcd.print("some text")

M5.Lcd.setCursor(xposition , yposition);
M5.Lcd.print("some text")

or ;

M5.Lcd.drawString("some text"), xposition , yposition , txtsize);

@chriswr said in How could I make text to speech using the speaker?:

ESP8266SAM *sam = new ESP8266SAM;
sam->Say(out, "Can you hear me now?");
delay(500);
sam->Say(out, "I can't hear you!");
delete sam;

@ChrisWR will this work with ATOM Echo Smart Speaker Development Kit? https://m5stack.com/collections/m5-atom

Unless I’m not understanding it correctly, according to the docs, you would select a pinX from the drop down list and type the pin number (ex: 26) into the Init pin block. Then you can get or set the pin via the other blocks. As far as pin0 through pin5, those seems to be a designator for the pin you are controlling.

BAT = battery

HI @AndreaF the space is a little tight, but perhaps you can put it in sideways and solder things to the right place via a few extra wires. As you can see in the picture of env hat below, the SDA of your TOF module should be connected to pin G0 and the SCL should be connected to G26 0_1579658678840_env_hat_01.jpg