Hi, I would like to know how to use the geomagnetic sensor in S3.
Thank you in advance
Hi, I would like to know how to use the geomagnetic sensor in S3.
Thank you in advance
I would like to know how to use a CO2 module (I2C) by UI Flow 2.
@jamesarm97 Thank you. I had used the try block.
Sorry, I had found it the trouble about SD memory itself. The S3 seems to need a high spec. SD memory. I have no trouble after replacing it to new one (32GB, 100MB/s).
Hi,
I would like to know the correct procedure for accessing files to SD memory.
First, is it necessary to initialize the SD memory? If necessary, I would like to know what initialization parameters are required. I want to know the difference between a and a+ in file open flags. I want to know the meaning of +.
When initializing with the default SD memory initialization parameters, the operation is very unstable and almost always crashes with an error.
Thank you in the advance
Hi,
I need a try and except block in UI Flow 2.
------- example -------
try:
print(x)
except:
print("An exception occurred")
I hope UI Flow 2 to support the CO2 sensor module.
Hi,
Core2's RTC still returns strange values at arbitrary times. For example, if the current date is 2023, the value 2004 will be returned.
My program may work right for connecting Wi-Fi, by modifying my blow program with UI Flow.
I find it strange that the block "Connect Wi-Fi SSID" does not work. It seems that the Wi-FI connection used by UI Flow has priority.
Thank you in advance.
Hirofumi
@ajb2k3 said in How to use the ExpPort For Core2 module:
o you mean this chart that is on the product page?
Hi,
Thank you for your reply.
Of course, I understand this information, but I'm asking because it doesn't work according to the information.
Thank you in advance.
Hirofumi
I call the UT Flow block, ”Connect to Wi-Fi <ssid>” PASSWORD <password> , so it doesn't return to my program. So, my program have freezed. The example provided by you work right and freeze my program.
I would know the correct full example for connecting Wi-Fi.
Thank you in advance
Hirofumi
Hi,
I have confirmed that port E is working properly. However, I can't get port B to port D up. There are only two UI Flow menu selections, Port A and Port E for an Unit. I can't find the specs for the 4 DIP switches on the ExpPort For Core2 module. I need a clearer and more polite explanation of the ExpPort For Core2 module.
Thank you in advance
Hirofumi
PA.HUB 2 Unit can't work right for ENV III and/or Mini BPS Unit.
I can't get the correct value of pressure from the sensors with PA.HUB 2 Unit. I can get the correct value from the sensors directly connecting with the M5 Stack Core 2.
Then, I wonder if "Pa.HUB UNIT" and "Pa.HUB 2 UNIT" are different in IU Flow? However, I can't find "Pa.HUB 2 UNIT" in the UNITS palette.