@viquaheeg520 I have a number of cameras that have caught fire whilst operating on charge. The ESP32 has cracked and literally let the smoke out. Not sure if that is related but clearly I can't risk using the 30 or so units we bought.
I
Posts made by iggym
-
RE: My UnitV2 camera overheats within 5 minutes. Is that normal?posted in PRODUCTS
-
ESP32 cameras catching on fire!posted in PRODUCTS
Hi, I bought a quantity of M5Stack ESP32 camera module this years and I have had 2 of the cameras literally smoking and catching on fire.
Internal examination of the camera showed that there seemed to be a 3v3 regulator failure which resulted in 5V from the USB going directly to the ESP32 causing it to overheat, crack and burn.
I have a third camera on the bench now and it is plugged into a 5v laboratory power supply. It initially took just under 300mA sitting there but it has just jumped to > 2000mA and so I have switched it off.
Is this a known issue with these cameras?
As it stands I can't really use any of the 30 cameras I bought due to the fire risk they pose.
Regards,
Ingmar
Australia