Hi @felmue
Followed your advice and got it to work. Thanks very much!
kazooz.igloos
@kazooz.igloos
Posts made by kazooz.igloos
-
RE: Can't access M5 Paper touch screen in Arduino IDE.
-
RE: Can't access M5 Paper touch screen in Arduino IDE.
@felmue
HiThanks for the reply.
i have made sure I updated everything so have M5EPD 0.1.4 and Arduino version 2.1.1 on Mac.
When I compile and download the programme touch screen still doesn't work.
The serial output is as follows:
18:05:56.314 -> M5EPD initializing...OK
18:06:00.418 -> M5EPD initializing...OK
18:06:04.542 -> M5EPD initializing...OK
18:06:08.651 -> M5EPD initializing...OK
18:06:12.847 -> M5EPD initializing...OK
18:06:16.893 -> M5EPD initializing...OKAny idea if the issue is with my setup or with my M5Paper.
Thanks
David
-
RE: Can't access M5 Paper touch screen in Arduino IDE.
Hi
I am also having the same issue that I can't get the touch example to work. On the factory test it needed to reboot a few times before the touch screen initialised.
I tried changing the code as above in the gt911 but now my M5Paper keeps rebooting.
Any advice?
Regards
David