Topics created by Knobsi

You can make a new class , create a task to control blink or not, and color, with only one function call in you main code . I have done it, but is on vacation now, so cant share it.

Sad to still see no StampC3 support in uiflow. The risc-v and C3 support in micropython has been around for quite some time, and other C3 boards are in there now.

@Knobsi Hi, your question is already two years old. I guess you'll have found the answer, however I just came across it today. I want to share with you an experience I had yesterday:

Suddenly I encountered a problem after upgrading the Arduino IDE from v2.3.4 to v2.3.5.

The board that I use is an M5 Atom Echo which has an ESP32-PICO processor.

After compiling and building a sketch, that compiled, built, and ran OK with v2.3.4,
It crashed after compiling and building and running with v2.3.5.

In the crash report I saw "DIO".
In Arduino v2.3.5 I checked the setting: > Tools > Flash Mode.
I saw that the Flash Mode was set for: "QIO".
After I changed the setting Flash Mode it to DIO, re-compiling and building, the sketch ran OK.

Regards,
@Paulskpt

Hi,
I am experiencing the exact same problem. Two of the devices giving me this issue for a while now. I have no idea how to resolve.