@kawabatapaper Hi there! Can you please provide the program? and also every time the error occurs in about 9 hours?
M5Stack_AG
@M5Stack_AG
Posts made by M5Stack_AG
-
RE: Error : can't create thread
-
RE: V-Training says "You must log in before uploading data"
@lagd sorry they will fix it in one week
-
RE: I want M5StickC can use BLE via Uiflow/microPython
@mrsteveman1 Hi there! I will forward your request to our technical support, thank you for letting us know!
-
RE: UHF-RFID-UNIT-JRD-4035 effective distance
@paopao Hi! If using UIFlow, then this is it, if it‘s Arduino. Serial port sending commands
or use API, then CH_index = 1
https://github.com/m5stack/M5Stack/blob/master/examples/Unit/UHF_RFID_JRD4035/RFID_command.cpp
-
RE: GPS - incorrect readings
@dsrc12 Hi! This must be outdoors in wide-open areas, cold start time takes about 3 / 4 minutes
-
RE: M5Stack core2 communicate with ROS
@lishengkkk Hi there, please check if the baud rate of both sides match (you can also try to change the baud rate, such as the common 115200). If it's a UART via separate wiring. Please make sure TX RX is connected correctly.
-
RE: V-Training says "You must log in before uploading data"
@k_hara Hi, We are fixing it! sorry for the inconvenience
-
RE: V-Training says "You must log in before uploading data"
@mpierce Hi, We are fixing it! sorry for the inconvenience
-
RE: V-Training says "You must log in before uploading data"
@lagd Hi, We are fixing it! sorry for the inconvenience
-
RE: Speaker.Volume on Core2
@hoodlem Hi! Thanks for the feedback! this is already on our lists! stay tuned for more