Topics created by vgamlc

Hello @vgamlc

no, the M5Atom Lite doesn't have an integrated RTC (RealTimeClock). Please also see here.

That said, you can add one using the RTC unit.

Thanks
Felix

Hello @vgamlc

which LoRaWAN module do you have? Different LoRaWAN modules have different AT command sets, therefore there isn't one example for all of them.

If you have the COM.LoRaWAN Module 868MHz then this post might get you started.

Thanks
Felix

Hello @vgamlc

thank you and you are welcome. Thank you for your feedback.

Happy New Year!

Felix

Any help? Pleased

@vgamlc, can you describe what you are wanting to see?

The Sk6812 (side LED bars) has a few methods you can use (take a look at components/core2forAWS/core2forAWS.h from one of the projects):
void Core2ForAWS_Sk6812_SetColor(uint16_t pos, uint32_t color);
void Core2ForAWS_Sk6812_SetSideColor(uint8_t side, uint32_t color);
void Core2ForAWS_Sk6812_SetBrightness(uint8_t brightness);
void Core2ForAWS_Sk6812_Show();
void Core2ForAWS_Sk6812_Clear();

If I want to set the left LED bar to yellow example, you should put the following into your application:

Core2ForAWS_Sk6812_SetSideColor(SK6812_SIDE_LEFT, 0xFFFF00); Core2ForAWS_Sk6812_Show();

Hi @vgamlc

I don't think you can change the volume of the beep. Although there is a setVolume() function the volume is only used in the PlayMusic() function, but not for the beep.

Please also refer to the Speaker source code

Thanks
Felix

Hi @vgamlc

I haven't tried it myself but according to this document the library should be included in the Arduino IDE library manager:

Installation painlessMesh is included in both the Arduino Library Manager and the platformio library registry and can easily be installed via either of those methods.

Cheers
Felix