Optical stepper motor test.
-
This is my code for testing optical drive stepper motors.
-
Please note that when using these drives the vref need to be just above the point where it stops the motors otherwise the motors overheat
-
Also from what I can tell, they have a Steps Per Revolution of 20 (18 degree steps)
-
@ajb2k3
Hello，I can not get your code in this post.M5Stack documentation URL
https://docs.m5stack.com
-
Blocky code is so simple that not provide a download.
-
@watson said in Optical stepper motor test.:
@ajb2k3
Hello，I can not get your code in this post.You also need to tune the drives way down low as it causes to steppers to overheat
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login