problem with m5stack (with mpu9250)



  • i , there are problems with m5stack. When connected to a PC(win 10), the device is not defined



  • @suslikman

    You must install the CP210X usb drivers for windows to recognize the device:

    1. install drivers.
    2. reboot.
    3. connect the usb cable.

    Drivers are available on the website, download button on the upper bar, last link at the bottom.



  • @anichangproblem with m5stack (with mpu9250) 中说:

    reboot.
    this does not help, the drivers are installed, another usb cable is purchased, the PC can not see at all its


  • M5Stack

    maybe u try another use cable or plug deeper?



  • @suslikman

    I am using M5Stack with Windows 10 - 64 bit on 3 different systems and M5Stack works fine on all. No issues.

    On one machine originally the drivers did not install correctly - though it wasn't obvious at the time.

    To check driver installation worked correctly:

    • Dis-connect M5Stack from PC if connected. Turn up PC volume. Open device manager. Connect M5Stack using USB cable.... once M5Stack is connected, you should hear a Windows sound - "bing""- and now in the device manager a new item should magically appear called "Ports” Click on it – it should show the Silicon Labs driver listed.

    If not , you need to re-install the driver - make sure Python is on your Windows path. You can verify the path is working by opening command prompt and typing - python.

    Are these files (below) available after you have Python installed and after you run get.exe ? They should be.

    0_1517497909581_b38be06f-ed2b-41d4-8a75-15e3897fa55b-image.png