SDCard not working after UIFlow 1 -> UIFlow 2 upgrade ? (M5Stack Fire)
-
I had a M5Stack Fire with UiFlow 1.0 and a working program that uses the SD Card, after upgrading to UIFlow 2 (last try with 2.1.5) I am not managing to make the SD Card work.
listdir("/") only shows/systemand/flash.
Trying /sd gives an ENODEV. Trying to initialize the SDCard gives either an RGB light turning green (thus not right pins), or an ESP_ERR_INVALID_STATE if I try the suggestsdcard.SDCard(slot=2, width=1, sck=18, miso=19, mosi=23, cs=4, freq=1000000)initialization from UIFlow.Some posts indicate that SDCard on UIFlow is not working since April 2024
https://community.m5stack.com/topic/2990/m5paper-sdcard-access/10How to get SDCard working on UIFlow?
-
R rodrigob referenced this topic on
-
@rodrigob This issue has been fixed in uiflow 2.1.6.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login