4-20 mA Unit with wemos S2 mini ESP32

obstbauer

Hello,
I want to use the 4-20 mA unit with a wemos S2 mini with ESP32 chip but I am not able to get some data from it.
I had a look at the github examples and made a program to show the current on a display. Display is working and I can find the unit with an i2c scanner.
Arduino gives no mistakes during compiling but it doesn`t work. Any ideas ?
Thank you

Here is my code:

#include <Wire.h>
#include <Arduino.h>
#include <U8g2lib.h>

#include "MODULE_4_20MA.h"

U8G2_SSD1309_128X64_NONAME2_F_HW_I2C u8g2(U8G2_R0,U8X8_PIN_NONE);

const byte led_gpio = 15;   // LED GPIO 15

MODULE_4_20MA cr;

void setup() {
  Wire.begin(33, 18);  // SDA pin 33, SCL pin 18
  u8g2.begin();
  pinMode(led_gpio, OUTPUT);
}
 
void loop() {
  float current = cr.getCurrentValue(0);

  u8g2.firstPage();
  do {

    u8g2.setFont(u8g2_font_ncenB10_tr);
    u8g2.drawStr(0,20,"Strom:");
    u8g2.setCursor(0, 40);
    u8g2.print(current);
  } while ( u8g2.nextPage() );
  
  digitalWrite(led_gpio, HIGH);
    delay(1000);
  digitalWrite(led_gpio, LOW);
  delay(1000);   
}

felmue

Hello @obstbauer

I think you might want to call cr.begin() in setup to set stuff like the proper I2C address for the library to use. See here.

Thanks
Felix

obstbauer

@felmue Hello,
thank you very much, it works !
I added

cr.begin(&Wire, MODULE_4_20MA_ADDR, 33, 18, 100000UL);

to void setup