@marnix201 Weirdly it was the cable! Tried another one and all OK. Thanks for the help!

@ajb2k3 Got it now thanks. I was trying to use the UIFlow 1.X example.

Bipman

@marnix201 Weirdly it was the cable! Tried another one and all OK. Thanks for the help!

@marnix201 Thanks. Just tried it and all as described except it doesn't find any ports. There is no beep from the computer either to say I've attached a device. I've tried several different USB ports on the PC too without success.

Hi

I'm trying to get my Core S3 into programming mode to reflash the demo but can't. Pressing the reboot button down for a while makes it go green but then it goes back to normal mode. I've tried everything to get it into the programming mode without success. Is there anything else I can try?

Steve

@teastain Ah, OK! I have the CoreS3 with the LLM attached. It's the LLM unit I'm having issues with in that it won't go into programming mode.

Steve

@teastain Sorry to be really thick but how does that help set it into programming mode? Love the signature by the way, I also have way too many units and modules!

Steve

@teastain OK, ta. For some reason it won't go into programming mode either. I've tried the 'hold button and add power' but it just goes to the green 'on' light. I've tried everything and I have added the driver first. Been through all the docs and not sure what I'm missing.

Steve

@kuriko Thank-you. I presume it is powered separately?

Steve

Hi

Is the LLM module to be used on it's own or can it be attached to the CoreS3 via the connectors i.e. plugged in to the S3 connector? I can't seem to find a picture of it connected to the S3 unit.

Steve

Thanks everyone!

@teastain I've tried the BME280, the heart rate monitor, the OLED Unit to name a few.

Bipman