@JeffDG Hi, Bug fixed, this feature is supported in the next firmware version(v1.12.5)
P
Save
Saving
pandian.nano
@pandian.nano
8
Reputation
18
Posts
258
Profile views
0
Followers
0
Following
Posts made by pandian.nano
-
RE: Read from EEPROM hangsposted in UIFlow
-
RE: "PA.HUB 2 Unit" can't work right for ENV III and/or Mini BPS Unit by UI Flow with web edition.posted in Bug Report
@digiponta Hi, when ENV III and PAHUB are used at the same time, it may not work, because the default I2C address of PAHUB is the same as of QMP6988 barometer inside ENVIII, you can avoid this problem by changing the I2C address of PAHUB or QMP6988
-
RE: json library error in uiflowposted in UIFlow
@parkesdj Hi, please use the latest uiflow firmware (v1.12.3)
-
RE: Tough can't save firmware.posted in Core 2
*Select the boot beep "off" option and click the save button
*Use the latest firmware -
RE: Pb.HUB will not connect. [Fixed]posted in Units
-
Please check again and check the result 0x61[97]
-
If you get 0x61 result then your pbhub i2c address was changed from 0x60 to 0x61
-
-
RE: UIFlow + StepMotor Driver M039posted in Bug Report
Hi, Are you using step motor driver v1 or v1.1? Microsteps function supports v1 and does not support v1.1
-
RE: Pb.HUB will not connect. [Fixed]posted in Units
First check if pbhub is connected or not? Check whether the i2c scan device result is [0x61] or [97]. -
RE: How to set advanced properties for UI elements (styles) and get more information on micropython modulesposted in UIFlow
@insaneLX @csierra67 @IsoEek @ajb2k3 @mtylerjr https://docs.m5stack.com/en/mpy/display/m5stack_lvgl
This is M5Core2 micropython UI elements information
