Posts made by pandian.nano

Hi @sodar,
Because all examples are designed for "core-basic" (device name), not stickc or other core devices (core2, fire, etc...), So you first understand the example logic and create (stickc) ui blocks that are relevant to your device.

Like this:

@piet
Do not use the desktop version uiflow firmware, it is discontinued, please use the new update firmware[v1.12.8] via the m5burner

@kunal
What is the real problem? Please explain in detail, we have tested it and it works on my side

Hi, @schorsch
Yes, it can, please press the "detail" button and show the error message, can you send the program code image and error message image? What units or modules are you using in the port(A, B, C)?

Hi @cwdallas,
We will update the new uiflow firmware version next week (Thursday) and every two weeks once

Hi @ksprayberry
Please use the latest uiflow firmware (v1.12.7) and this error will not occur

Hi @cwdallas,
Sorry, this is a firmware bug, The bug is fixed now, and this feature is supported for the next firmware version (v.1.12.8)

Hi @cwdallas, problem solved or not?

Hi, @natgus @Brentbraunmagic

Check if this wifi and server are connected or not, if wifi is connected screen will be shown orange color and if the server is connected screen will be shown sky blue color.

Please refer to this link: https://docs.m5stack.com/en/quick_start/m5stickc_plus/uiflow

Update to the latest firmware version

Hi @cwdallas,
We tested for mqtt based on m5core and it works for my side
Are you testing in "RUN" or "DOWNLOAD" mode?
If using "DOWNLOAD" mode, you need to configure wifi first

Hi @erich,
These features(f string) are supported by microPython version v1.17 or higher and uiflow 1 is supported by micropython v1.12, so these features(f string) are not supported.

Hi @erich f-strings don’t support for micropython
refer this link: https://docs.micropython.org/en/latest/genrst/core_language.html

Hi @erich
For example:
name='john'
print("my name is {0}".format(name))

Hi @marcuswade, It is the equivalent block of uiflow2.0

Hi, @Alex1 Please refer to this guide

1. Installing the UIFlow 2.0 Firmware with M5Burner and Selecting the CoreS3 for programming.

https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/products/core/CoreS3/CoreS3 Development Kit-compressed (1).pdf

Hi, @cowcowtweet increases header input

@JeffDG Hi, Bug fixed, this feature is supported in the next firmware version(v1.12.5)

@digiponta Hi, when ENV III and PAHUB are used at the same time, it may not work, because the default I2C address of PAHUB is the same as of QMP6988 barometer inside ENVIII, you can avoid this problem by changing the I2C address of PAHUB or QMP6988

@parkesdj Hi, please use the latest uiflow firmware (v1.12.3)

@IsoEek

*Select the boot beep "off" option and click the save button
*Use the latest firmware