I hope someone has achieved this and can point me in the right direction.
I have an M5 with the W5500 LAN base and am trying to have it run just a simple web form to turn a couple of ports on or off. The code below works fine if I use WiFi, but just hangs at the 'conn, addr = s.accept()' command when I used the wired LAN connection. I am getting an IP address and I can ping it, but when I try and browse to it I get a 'connection refused' error.
Help!
Here is the code:
from m5stack import *
from m5ui import *
from uiflow import *
import module
import network
import socket
lcd.clear()
lan = module.get(module.LANBASE)
eth0Ip = lan.get_if_config()[0]
label1 = M5TextBox(10, 10, "Eth0 ip :" + str(eth0Ip), lcd.FONT_Ubuntu, 0xfff500, rotate=0)
#lan.tcp_udp_config(eth0Ip, 80, 1, 1)
#label2 = M5TextBox(10, 25, "UDP configured", lcd.FONT_Ubuntu, 0xfff500, rotate=0)
Setup GPIO
pin1 = machine.Pin(5, machine.Pin.OUT)
pin2 = machine.Pin(2, machine.Pin.OUT)
def generate_html():
# Generate HTML based on GPIO states
state1 = "Power is open - Click to close" if pin1.value() else "Power is closed - click to open"
state2 = "Reset is open - Click to close" if pin2.value() else "Reset is closed - click to open"
html = """<!DOCTYPE html>
<html>
<head> <title>Remote Reset and Power Control</title> </head>
<body> <h1>Remote Reset and Power Control</h1>
<button onclick="toggleGPIO(1)">{state1}</button><br>
<button onclick="toggleGPIO(2)">{state2}</button><br>
<script>
function toggleGPIO(gpio) {{
var xhr = new XMLHttpRequest();
xhr.onreadystatechange = function() {{
if (this.readyState == 4 && this.status == 200) {{
window.location.reload(); // Reload the page
}}
}};
xhr.open('GET', '/toggle?gpio=' + gpio, true);
xhr.send();
}}
</script>
</body>
</html>
"""
return html
HTTP response
def http_response(status, content_type, body):
return 'HTTP/1.1 {} OK\r\nContent-Type: {}\r\n\r\n{}'.format(status, content_type, body)
Handle HTTP requests
def handle_http_request(conn):
request = conn.recv(1024)
request = str(request)
#print('Content = %s' % request)
gpio = request.find('/toggle?gpio=')
if gpio == 6:
gpio_number = int(request[19])
if gpio_number == 1:
pin1.value(not pin1.value())
elif gpio_number == 2:
pin2.value(not pin2.value())
response = generate_html()
conn.sendall(http_response(200, "text/html", response))
conn.close()
Main loop
addr = socket.getaddrinfo('0.0.0.0', 80)[0][-1]
#s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) # This was something that ChatGPT suggested - made no difference
s = socket.socket()
s.bind(addr)
s.listen(1)
label2 = M5TextBox(10, 40, "Listening on :" + str(addr), lcd.FONT_Ubuntu, 0xfff500, rotate=0)
while True:
try:
label2 = M5TextBox(10,90, "Working...", lcd.FONT_Ubuntu, 0xfff500, rotate=0)
conn, addr = s.accept()
label2 = M5TextBox(10, 70, "Connection from :" + str(addr), lcd.FONT_Ubuntu, 0xfff500, rotate=0)
handle_http_request(conn)
except OSError as e:
conn.close()
label2 = M5TextBox(10, 70, "Connection closed :" + str(addr), lcd.FONT_Ubuntu, 0xfff500, rotate=0)