@ajb2k3 A video of the bouncing text
Bouncing text

and a video of rotating text.
Rotating Text

@mrjellofingers said in M5Stack Camera Streaming:

I have a "model A" camera and I wasn't able to get the code at https://github.com/m5stack/m5stack-cam-psram to work using the ModeA branch and setting the flag #define M5_CAM_KIND 1.

Can you post a picture of you camera?

@lastcaress Radiant doesn't work on OSX but Horos works great and it is amazing the details you captured in the xrays.
Thank you.

@LastCaress Welcom to publish more project at PROJECT section.

@ajb2k3
You are welcome!!
@lovyan03
Thank you lovyan03!!

Nice one, thanks for sharing.

First attempt at a custom PCB for the servo clone.
link text

@pattiuak said in Sharing Code for RC Servo tester:

@ajb2k3 I don't mind. Please do it.

Thank you Very Much!

ajb2k3, I'm using arduino IDE.

there is a small mistake in the last commands:

ampy put boot.py

that is

ampy put {{local_file_path}} # implicit remote path and name with json

and the JSON-File

@farmeuhly said in PIN number and shields:

Hello, happy new year !
I'm back on my tests...

I have a lot of problems.
1 : problem for uploading sketch on the board, i should remove the "bottom" of the m5stack and bush the boot button for it to work ! And sometimes it fails anyway...

2 : I tried to stop the pins on the "bottom" with the sketch "blink" and those that work are :
0, 2, 3, 5, 12, 13, 15, 16, 17, 19, 21, 22, 26
The others (1, 18, 23, 25, 34, 35, 36) doesn't work.

3 :
I don't understand why the same simple sketch work fine on arduino uno board and don't work on the m5stack.
I put the #include <M5Stack.h>, m5.begin(), m5.update... But i have the impression that the selected pins don't work.

What i'm doing wrong ?

Because the esp32 and the mega328p do not have the same pins.
The AtMegas have defined pins but the esp32 uses a matrix of functions that can be assigned to each i/o pin.

Check out the esp32 data sheet for these functions.

I solved this problem:

from m5stack import * import wifisetup wifisetup.auto_connect()