I agree! USB power (5V) won’t be enough since the DC input requires at least 6V. If you’re set on using the DC port, you’d need a step-up converter. Otherwise, adding a USB connector to the wires sounds like the easier option.
S
Posts made by Slarck
-
RE: DC Input questions on M5dialposted in General
-
RE: m5dial: wifi not work when rfid is enabledposted in General
The RFID module might be interfering with the WiFi signal. Try using a different power source or check if the RFID is drawing too much current and test with a different router or 2.4GHz channel.
-
RE: How to add multiple modulesposted in General
Adding multiple modules to an M5Stick is possible, but you'll need to plan the connections carefully to avoid pin conflicts. Check the pinouts and consider using an expansion board. With the right firmware, you can get both the CC1101 and PN532 working together.
-
RE: i cant log in to m5burner linuxposted in SOFTWARE
Try running M5Burner from the terminal to check for any error messages and make sure you have the latest version, and that Python & dependencies are installed correctly.