You should charge your battery to full. Do you tried to calibrate your sensor?
Press and hold the right C key to start the machine, and release the key after hearing the "drip" sound. The sensor will enter the calibration setting, and keep the host horizontal and still. After 3 seconds, the sensor calibration is completed, and it will automatically enter the balance mode after the calibration is completed.If you found that Bala cannot keep balance during use, it can be solved by trying to calibrate the sensor.
I didn't say it was clean, it's a workaround. You can buy grove to dupont converters.
@skink said in Application M5 AC Socket:
Hi at all,
is there a test program or an EasyLoader program with which I test the M5 AC socket !?
I have M5 stack with RS485 to TTL Unit or also a M5 Stick-C with M5StickC RS485 HAT.
The only known information is found here: https://docs.m5stack.com/#/en/app/ac_socket . I’m still waiting on one to be delivered
@lukasmaximus Thanks so much for your reply! Sorry I missed it. I found the Arduino sample and confirmed it works. Somehow I had been led to believe from issues on Github that it was only supported on Fire, but the battery sample works on my M5 Basic (black).
@ajb2k3 said in Application M5Stack Demo-Board (Factory-Test):
Try deleting the circle at the beginning of the line.
I've already done that, erased the circle in front of the bracket.
But nevertheless it runs only up to function 6!
Just found out, that I get the following error message working with Arduino 1.8.9 when I load the code into Arduino !!
Error message : "MFRC522_i2C.cpp" contains unknown characters. If the code was created with an older version of Arduino, you might want to use Tool -> Correct Coding & Reload etc. etc. to correct the code.
But even afterwards the program runs only up to function 6!
@krso said in M5stack STEP 3D files:
Would it be possible to add STEP 3D models to all products. It's very convenient for project planning.
Now (last month) JTAG debugging went free on PlatformIO/Visual Studio Code and Andreas Spiess did a YouTube video on debugging with the Espressif ESP-prog board JTAG interface for the ESP-32.
First thing I did was check into M5Stack Core and found it wouldn't work.
Another version with IO12-15 available for JTAG inline debugging would be necessary and appreciated.
Thanx a 1,000,000 for taking the time to help me.
Oops, my bad! I had also been playing with a Heltec 32 WiFi kit, and forgot to change the board (how embarrassing).
I am still indoors, so will either need to use a battery or, perhaps, sit by the window to test GPS.
At the moment, after a few seconds the software reports "Brownout detector was triggered" over serial, then reboots. I will investigate that & ask a new question if I can't solve it. Sorry to have taken your time.